…
So when we left off with the geothermal install they finished putting in the underground loop and left two stubs outs of pipe into basement. About a week later they came to install the actual geothermal unit. I didn't take many pictures of the process, because it's actually not very different than a normal HVAC install. The first day, they disconnected our existing heater (it was broken anyways). This allowed them to place the new unit in its place and take measurements for the metal duct work…
The story of our geothermal HVAC installation
Daniela's dog Dasha (aka Baby) is around 9 years old now and has lost a lot of strength in her back legs. Often times she gets on the strugglebus when trying to get back up the back stairs onto the porch to go inside - so Daniela wanted a ramp made for her baby. After deciding on how long the ramp should be (with some consults with her friend who does dog rehab) the first step is making the stringers. Just a handful of cuts with a circular saw on some 2x10 material. Starting on the stringers (…
When we bought this house, I didn't do my best when determining exactly how much power was going to the shop. I saw an 100 Amp breaker in the panel in the garage and figured it had plenty of power; but I failed to verify the main panel in the house had a matching breaker. Well it turns out that it only had a 30 amp.. Not the end of the world, we could have made it work - after all, we used the dryer's 30 Amp plug in Texas just fine - never even tripped.…